Select item to view
Fixed a bug where the repeater might be delayed by a few seconds when powering on
Added the ability to view the SRPT-02 serial number from the Web GUI
SRPT-02 Firmware V2.1.0
- Add 5 and 10 WPM options to Web GUI
- Add Periodic Station ID transmission (Fox Hunt Feature)
Set Periodic Station ID to the transmit frequency in seconds
Set Periodic Station ID to 0 to disable this feature
4/4/2024: There is a problem where the “Button Lockout” feature does not work when “Periodic ID” is enabled. Work around: Disable Periodic Id when you need to use the Button Lockout feature. This will be fixed in a future revision of firmware.
SRPT-02 Firmware V2.0.9
Added Deep Sleep feature. Unit will consume under 60uA in standby.
Added Transmit Delay.
Optimize firmware, now runs at 80MHz, slower speed for lower power consumption.
Added button lockout feature. Press and hold the power button when the repeater is powered off places it in lockout mode. Press reset button to resume normal operation.
Optimize DTMF detection.
GMRS Repeater Setup Example .csv file for Chirp (UV-5R Repeater Radio)
GMRS Repeater Setup Example .csv file for Chirp (UV-5R Station Radios)
GMRS CTCSS Repeater Setup Example .csv (UV-5R Station Radios)
GMRS CTCSS Repeater Setup Example .csv file (UV-5R Repeater Radio)
M40-Pelican-SRPT-02-Mounting-Plate
Select item to view
PCB Rack 3D .step file
PCB Rack .stl file for 3D printing